Notes sobre les peces d'elevació del boom de l'ascensor en viu:
Per tal d’afectar la font d’alimentació normal, de vegades cal dur a terme una inspecció en tensió de baixa - en tensió de peces d’elevació de boom per a armaris de distribució de baixa tensió - i altres equips de baixa tensió -. . Les peces d’elevació de boom de manteniment en tensió generals de - de baixa tensió han d’estar atents a les qüestions següents.
1. There should be a personal guardianship. The purpose is that if an accident occurs during the overhaul, the guardian can immediately cut off the power (disconnect the circuit breaker or knife gate in the distribution cabinet, or unplug the fuse); in addition, when the overhauler may touch or overshoot When approaching the conductor or misoperation, the guardian can remind in time to prevent electric shock and other accidents.
2. Use tools with insulated handles, stand on dry insulation (such as wooden ladders, wooden tables, stools, etc.) when working, wear gloves (such as dry cloth gloves), and wear insulated shoes (such as rubber shoes, Plastic sole shoes). If you are working on the road, you should also wear a hard hat. Must wear long sleeves to work. It is strictly forbidden to use tools such as files, steel tapes, brushes with metal objects, threading screwdrivers and ordinary wire cutters.
3. Quan es revisi la línia de cinturó de tensió de - de baixa tensió muntada per alta i baixa tensió al mateix pol o a la plataforma del transformador, comproveu la distància del cos carregat de tensió alta - per cable, i agafeu mesures per evitar el contacte accidental amb el cos carregat d’alta tensió -. Si no es prenen mesures d’aïllament per a conductors en tensió de baixa - tensió, el personal de manteniment no hi haurà de passar. Quan es treballa en dispositius de distribució, com ara armaris de distribució de tensió de baixa tensió -, s'han de prendre mesures d'aïllament per evitar que els curtcircuits de fase - i - de fase i la posada a terra única -.
4. Before climbing the pole, transformer stand or equipment, the phase line, neutral line and ground line should be distinguished, and the working position should be selected. When disconnecting the conductor, the phase wire should be disconnected first, and then the neutral or ground wire should be disconnected; when overlapping the conductor, the sequence is reversed. During the operation, the human body must not touch two threads at the same time.
5. Els enrotllaments secundaris del transformador de tensió i el transformador de corrent s’han de posar a terra de forma fiable quan es revisi el mesurador en tensió - hora i el circuit de relé al gabinet de distribució d’energia. Quan es desconnecti el bucle actual, curt - circuiti el terminal dedicat al costat secundari del transformador de corrent.
6. Standing ladders and stools should be firmly installed, and someone underneath must be supported to prevent the maintenance personnel from sliding down.
7. When repairing the wiring pile heads where the phase line and the neutral line (two phase lines of different phases) are very close, such as the power switch, the terminal of the power distribution cabinet, the relay, the transfer switch, etc., should be carried out very carefully Power outages should be carried out for maintenance), eyes must not be close, otherwise it is easy to cause a short circuit accident and burn your eyes.
8. The live lift boom parts should pay attention to moisture and waterproof on the ground; outdoor live lift boom parts should be avoided on rainy days. On thunderstorm days, live lift boom parts should be stopped.
Un cop finalitzades les peces de l’alça de l’alça en viu, s’han de revisar amb cura. El contingut d’inspecció és el mateix que la inspecció d’avaria.






